Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 10, 2012 21:55:02 GMT 1
Yayyyy, lets hope for some dry weather and u can get finished. Some good weather AND some good luck needed, I went round tightening all the bolts to the correct torque and sheared one of the leg top mounting studs, gotta take the whole leg off again. I will try to replace the stud with a bolt, if that don't work I will have to order and wait for a new top mount
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 11, 2012 8:40:18 GMT 1
OK, panic over, took a hammer to the stud and it popped out no problem, managed to get a nut and bolt in so everything now fine. Anybody got a stud
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 11, 2012 11:10:00 GMT 1
Started on the NS, caliper and disk off with no problem. Coil spring is broke, good job I ordered two, it's an old break so question is HOW DID IT PASS AN MOT Can't remove the bolt which clamps the leg to the hub so I will have to remove the complete hub assembly
|
|
|
Post by Fli on Jun 11, 2012 11:20:25 GMT 1
I can see a Book, Film and sequel, and Pantomime coming from this Pandj
|
|
|
Post by troll on Jun 11, 2012 11:24:33 GMT 1
OK, panic over, took a hammer to the stud and it popped out no problem, managed to get a nut and bolt in so everything now fine. Anybody got a stud I hear there is one in 35land
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 11, 2012 11:25:03 GMT 1
I can see a Book, Film and sequel, and Pantomime coming from this Pandj Will there be a happy ending
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 11, 2012 19:03:23 GMT 1
OH boy, anybody got a ball joint splitter ?
|
|
|
Post by Pasha on Jun 11, 2012 19:59:48 GMT 1
OH boy, anybody got a ball joint splitter ? Hey pandj-- maybe you should ask some of our female members They always cracking nuts
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 11, 2012 20:19:51 GMT 1
OH boy, anybody got a ball joint splitter ? Hey pandj-- maybe you should ask some of our female members They always cracking nuts I think the OH will be soon if I don't get some gardening done.
|
|
|
Post by lib on Jun 11, 2012 21:25:37 GMT 1
The reason, in my humble opinion as a one time MOT inspector, that your broken coil passed is 'cos no-one looked at it.
ps have you tried the two hammer technique to jar the taper free on the ball joint?
|
|